Displaying And Maintaining Link Aggregation - H3C LS-3100-52P-OVS-H3 Operation Manual

S5500-ei series ethernet switches
Table of Contents

Advertisement

traffic as needed. For example, for Layer 3 traffic, you can use IP addresses as hash keys for load
sharing calculation.
Follow these steps to configure load sharing mode for link aggregation groups:
To do...
Enter system view
Configure the link
aggregation load
sharing mode
Currently, the hash keys for a switch are source IP addresses, destination IP addresses, source MAC
addresses, destination MAC addresses, source ports, destination ports, or the combination of these
fields carried in packets (excluding the combination of MAC addresses with IP addresses, source ports,
or destination ports). The ingress-port parameter can only be used as a hash key when combined with
a MAC address, not when combined with an IP address, source port, or destination port. The parameter
alone cannot be used as a hash key either.

Displaying and Maintaining Link Aggregation

To do...
Display the local system ID
Display the aggregation
group-specific load sharing
mode
Display link aggregation details
of ports
Display the summary
information of all aggregation
groups
Display detailed information of
aggregation groups
Clear the LACP statistics of
ports
Use the command...
system-view
link-aggregation
load-sharing mode
{ destination-ip |
destination-mac |
destination-port |
ingress-port | source-ip |
source-mac | source-port }
*
Use the command...
display lacp system-id
display link-aggregation
load-sharing mode
display link-aggregation
member-port [ interface-type
interface-number [ to interface-type
interface-number ] ]
display link-aggregation
summary
display link-aggregation verbose
[ bridge-aggregation
[ interface-number ] ]
reset lacp statistics [ interface
interface-type interface-number [ to
interface-type interface-number ] ]
1-10
Remarks
Optional
By default, the hash keys for Layer 2 packets
are source/destination MAC addresses, and
those for Layer-3 packets are
source/destination IP addresses.
The setting you made applies to all
load-sharing link aggregation groups.
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Remarks

Advertisement

Chapters

Table of Contents
loading

Table of Contents