Displaying And Maintaining Vlan - H3C LS-3100-52P-OVS-H3 Operation Manual

To do...
Associate an IP subnet with the
current VLAN
Return to system view
Enter interface
view or port
group view
Configure port link type as hybrid
Configure the hybrid port(s) to
permit the specified IP
subnet-based VLANs to pass
through
Associate the hybrid port(s) with
the specified IP subnet-based
VLAN
After you configure a command on a Layer-2 aggregate interface, the system starts applying the
configuration to the aggregate interface and its aggregation member ports. If the system fails to do that
on the aggregate interface, it stops applying the configuration to the aggregation member ports. If it fails
to do that on an aggregation member port, it simply skips the port and moves to the next port.

Displaying and Maintaining VLAN

To do...
Display VLAN information
ip-subnet-vlan
[ ip-subnet-index ] ip
ip-address [ mask ]
quit
Enter Ethernet interface interface-type
interface view interface-number
Enter Layer-2 interface
aggregate bridge-aggregation
interface view interface-number
Enter port group port-group manual
view port-group-name
port link-type hybrid
port hybrid vlan vlan-id-list
{ tagged | untagged }
port hybrid ip-subnet-vlan
vlan vlan-id
Use the command...
display vlan [ vlan-id1 [ to
vlan-id2 ] | all | dynamic |
interface interface-type
interface-number.subnumber |
reserved | static ]
Use the command...
1-14
Remarks
Required
The IP network segment or IP
address to be associated with
a VLAN cannot be a multicast
network segment or a
multicast address.
—
Required
Use either command.
In Ethernet interface view,
the subsequent
configurations apply to the
current port.
In port group view, the
subsequent configurations
apply to all ports in the port
group.
In Layer-2 aggregate
interface view,
subsequent configurations
apply to the
aggregate interface and all
its member ports.
Required
Required
Required
Remarks
Available in any view
the
Layer-2