Multicast Volume - H3C LS-3100-52P-OVS-H3 Operation Manual

Features
IPv6 IS-IS
IPv6 BGP
Route Policy
BFD
MCE

Multicast Volume

Table 3-4 Features in Multicast volume
Features
Multicast Overview
Multicast Routing and
Forwarding
The IS-IS routing protocol supports multiple network protocols, including
IPv6. IS-IS with IPv6 support is called IPv6 IS-IS dynamic routing
protocol. This document describes:
Configuring IPv6 IS-IS Basic Functions
Configuring IPv6 IS-IS Routing Information Control
To support multiple network layer protocols, IETF extended BGP-4 by
introducing IPv6 BGP. This document describes:
Configuring IPv6 BGP Basic Functions
Controlling Route Distribution and Reception
Configuring IPv6 BGP Route Attributes
Tuning and Optimizing IPv6 BGP Networks
Configuring a Large Scale IPv6 BGP Network
Routing policy is used on the router for route inspection, filtering,
attributes modifying when routes are received, advertised, or
redistributed. This document describes:
Defining Filters
Route policy configuration
Bidirectional forwarding detection (BFD) provides a single mechanism to
quickly detect and monitor the connectivity of links in networks.
Configuring BFD Basic Functions
Configuring Protocol-based BFD
Enabling Trap
Multi-CE (MCE) enables a switch to function as the CEs of multiple VPN
instances in a BGP/MPLS VPN network, thus reducing the investment on
network equipment.
Introduction to MCE
Configuring a VPN Instance
Configuring Route Exchange between a MCE and a Site
Configuring Route Exchange between a MCE and a PE
This document describes the main concepts in multicast:
Introduction to Multicast
Multicast Models
Multicast Architecture
Multicast Packets Forwarding Mechanism
Multicast routing and forwarding refer to some policies that filter RPF
routing information for IP multicast support. This document describes:
Multicast routing and forwarding overview
Multicast routing and forwarding configuration
3-7
Description
Description