Configuring Ipv6 Bgp Soft Reset; Configuring The Maximum Number Of Load-Balanced Routes - H3C LS-3100-52P-OVS-H3 Operation Manual

Configuring IPv6 BGP Soft Reset

Enable route refresh
Follow these steps to enable route refresh:
To do...
Enter system view
Enter BGP view
Enter IPv6 address
family view
Enable route refresh
Perform manual soft-reset
Follow these steps to perform manual soft reset:
To do...
Enter system view
Enter BGP view
Enter IPv6 address family view
Save all routes from an IPv6
peer/peer group, not letting
them go through the inbound
policy
Return to user view
Soft-reset BGP connections
manually
If the peer keep-all-routes command is used, all routes from the peer/peer group will be saved
regardless of whether the filtering policy is available. These routes will be used to generate IPv6 BGP
routes after soft-reset is performed.

Configuring the Maximum Number of Load-Balanced Routes

Follow these steps to configure the maximum number of load balanced routes:
To do...
Enter system view
Enter BGP view
Enter IPv6 address family view
Use the command...
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name | ipv6-address }
capability-advertise route-refresh
Use the command...
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name | ipv6-address }
keep-all-routes
return
refresh bgp ipv6 { all | ipv6-address |
group ipv6-group-name | external |
internal } { export | import }
Use the command...
system-view
bgp as-number
ipv6-family
1-14
Remarks
—
—
—
Optional
Enabled by default.
Remarks
—
—
—
Optional
Not saved by
default.
Required
Remarks
—
—
—