Configuring Ipv6 Bgp Route Redistribution; Configuring Ipv6 Bgp Route Summarization; Advertising A Default Route To An Ipv6 Peer/Peer Group - H3C LS-3100-52P-OVS-H3 Operation Manual

Enable IPv6
Configure the IPv6 BGP basic functions

Configuring IPv6 BGP Route Redistribution

Follow these steps to configure IPv6 BGP route redistribution:
Enter system view
Enter BGP view
Enter IPv6 address family view
Enable default route redistribution into
the IPv6 BGP routing table
Enable route redistribution from
another routing protocol
If the default-route imported command is not configured, using the import-route command cannot
redistribute any IGP default route.

Configuring IPv6 BGP Route Summarization

To reduce the routing table size on medium and large BGP networks, you need to configure route
summarization on BGP routers. BGP supports only manual summarization of IPv6 routes.
Follow these steps to configure IPv6 BGP route summarization:
To do...
Enter system view
Enter BGP view
Enter IPv6 address
family view
Configure manual route
summarization

Advertising a Default Route to an IPv6 Peer/Peer Group

Follow these steps to advertise a default route to an IPv6 peer/peer group:
To do...
system-view
bgp as-number
ipv6-family
aggregate ipv6-address prefix-length [ as-set
| attribute-policy route-policy-name |
detail-suppressed | origin-policy
route-policy-name | suppress-policy
route-policy-name ] *
Use the command...
system-view
bgp as-number
ipv6-family
default-route imported
import-route protocol [ process-id ]
[ med med-value | route-policy
route-policy-name ] *
Use the command...
1-7
Remarks
—
—
—
Optional
Not enabled by
default.
Required
Not enabled by
default.
Remarks
—
—
—
Required
Not configured by
default.