Table of Contents
Advertisement
Installation Manual
H3C S3610 Series Ethernet Switches
8-port 10Base-T/100Base-TX module
8-port 100 Mbps SFP module
Note:
For specific description on the interface modules, refer to Chapter 7 "Optional Interface
Modules" in page 7-1.
IV. Console port
The S3610-52M/S3610-52M-DC switch provides an EIA/TIA-232-compliant console
port. You can use this port to configure the switch locally or remotely. See Table 1-6 for
the attributes of the console port.
1.6.2 Rear Panel
I. Rear panel of the S3610-52M switch
The rear panel of the S3610-52M switch is illustrated by the following figure. On the
rear panel, there are grounding screw, AC-input power socket, RPS DC-input
redundancy power socket, and the fixed interface module.
(1) Grounding screw
(3) RPS DC-input redundancy power socket
Figure 1-10 Rear panel of the S3610-52M
Rated voltage range: 100 VAC to 240 VAC; 50 Hz or 60 Hz
Max voltage range: 90 VAC to 264 VAC, 50 Hz or 60 Hz
II. Rear panel of the S3610-52M-DC switch
The rear panel of the S3610-52M-DC switch is illustrated by the following figure. On the
rear panel, there are grounding screw, DC-input power socket, RPS DC-input
redundancy power socket, and the fixed interface module.
(2) AC-input power socket
(4) Fixed interface module
1-23
Chapter 1 Product Overview
Advertisement
Table of Contents
