Table of Contents
Advertisement
Installation Manual
H3C S3610 Series Ethernet Switches
Figure 4-2 Setting up a new connection
Step 2: Enter the name of the new connection in the Name field and click <OK>. The
dialog box, as shown in Figure 4-3 displays.
Step 3: Select the serial port to be used from the Connect Using dropdown menu. The
serial port must be the same port connected by the console cable.
Figure 4-3 Setting the connection port
Step 5: Click <OK>. The Port Settings tab, shown in Figure 4-4, appears and you can
set serial port parameters. Set the following parameters:
Baud rate = 9600
Chapter 4 Starting up the Switch at the Initial Boot
4-2
Advertisement
Table of Contents
