Table of Contents
Advertisement
Installation Manual
H3C S3610 Series Ethernet Switches
(1) 100 Mbps Ethernet port status LEDs
(3) 7-segment numerical display
(5) Port mode switch LED
(7) DC-input power LED
Figure 1-7 Front panel of the S3610-52P
II. LEDs
For your convenience to monitor the operation of the switch, the S3610-52P provides
one power LED, one DC-input power LED, one port mode switch LED, one 7-segment
numerical display, 48 × 10/100 Mbps Ethernet port status LEDs, and four 1000 Mbps
SFP port status LEDs on its front panel. See Table 1-7 for the meanings of these LEDs.
III. Fixed 10Base-T/100Base-TX Ethernet Ports
For the attributes of the 10Base-T/100Base-TX Ethernet ports, see Table 1-3.
IV. 1000 Mbps SFP ports
The S3610-52P provides up to four 1000 Mbps SFP ports on its front panel. You can
determine the number and the types of the ports according to your needs.
SFP modules that can be connected with the ports are hot-swappable and multifarious.
This brings flexibility to your actual networking.
You can choose the SFP modules listed in Table 1-4 as required.
(2) Console port
(4) Port mode switch button
(6) Power LED
(8) 1000 Mbps SFP port status LEDs
1-20
Chapter 1 Product Overview
Advertisement
Table of Contents
