Table of Contents
Advertisement
Installation Manual
H3C S3610 Series Ethernet Switches
III. 100 Mbps SFP ports
The S3610-28F provides 24 × 100 Mbps SFP ports (No. 1 to 24) on its front panel, each
of which can be connected with an SFP module.
The available SFP modules are hot-swappable and multifarious. This brings flexibility
to your actual networking.
You can choose the following SFP modules as required.
Table 1-9 Available 100 Mbps SFP modules
100 Mbps SFP optical module
100 Mbps BIDI module
Note:
For specifications of each SFP module, refer to H3C Low-End Series Ethernet
Switches Pluggable Module Manual.
The available SFP modules may change as time goes by. Contact the H3C
marketing or technical support personnel for the latest available SFP modules.
IV. 1000 Mbps SFP ports
The S3610-28F provides two 1000 Mbps SFP ports (No. 25 and 26) on its front panel,
each of which can be connected with an SFP optical interface module or an SFP
electrical interface module.
The available SFP modules are hot-swappable and multifarious. This brings flexibility
to your actual networking.
You can choose the SFP modules listed in Table 1-4 as required.
V. Fixed 10/100/1000Base-T Ethernet ports
The S3610-28F provides two 10/100/1000Base-T Ethernet ports (No. 27 and 28) on its
front panel. For the attributes of these ports, see Table 1-5.
VI. Console port
The S3610-28F provides an EIA/TIA-232-compliant console port. You can use this port
to configure the switch locally or remotely. See Table 1-6 for the attributes of the
console port.
Item
1-18
Chapter 1 Product Overview
Specific model
SFP-FE-SX-MM1310-A
SFP-FE-LX-SM1310-A
SFP-FE-LH40-SM1310
SFP-FE-LH80-SM1550
SFP-FE-LX-SM1310-BIDI
SFP-FE-LX-SM1550-BIDI
Advertisement
Table of Contents
