Table of Contents
Advertisement
Installation Manual
H3C S3610 Series Ethernet Switches
IV. 1000 Mbps SFP ports
The S3610-28TP provides two 1000 Mbps SFP ports (No. 25 and 26) on its front panel,
each of which can be connected with an SFP optical interface module or an SFP
electrical interface module.
The available SFP modules are hot-swappable and multifarious. This brings flexibility
to your actual networking.
You can choose the following SFP modules as required.
Table 1-4 Available 1000 Mbps SFP modules
Gigabit SFP optical module
100 Mbps SFP optical module
Gigabit BIDI module
100 Mbps BIDI module
SFP electrical module
Note:
For specifications of each SFP module, refer to H3C Low-End Series Ethernet
Switches Pluggable Module Manual.
The available SFP modules may change as time goes by. Contact the H3C
marketing or technical support personnel for the latest available SFP modules.
The 1000 Mbps/100 Mbps BIDI modules will be supported in Release 5303 and
later version.
V. Fixed 10/100/1000Base-T Ethernet ports
The S3610-28TP provides two 10/100/1000Base-T Ethernet ports (No. 27 and 28) on
its front panel. The following table describes the attributes of these ports:
Item
1-7
Chapter 1 Product Overview
Specific model
SFP-GE-SX-MM850-A
SFP-GE-LX-SM1310-A
SFP-GE-LH40-SM1310
SFP-GE-LH40-SM1550
SFP-GE-LH70-SM1550
SFP-FE-SX-MM1310-A
SFP-FE-LX-SM1310-A
SFP-FE-LH40-SM1310
SFP-FE-LH80-SM1550
SFP-GE-LX-SM1310-BIDI
SFP-GE-LX-SM1490-BIDI
SFP-FE-LX-SM1310-BIDI
SFP-FE-LX-SM1550-BIDI
SFP-GE-T
Advertisement
Table of Contents
