Table of Contents
Advertisement
Installation Manual
H3C S3610 Series Ethernet Switches
Starting......
Press Ctrl-B to enter Boot Menu... 5
To enter the Boot Menu, press <Ctrl+B> within five seconds after the message "Press
Ctrl-B to enter Boot Menu... 5" appears. Otherwise, when the waiting time changes
from 5 to 0, the system automatically boots up and displays:
**************************************************************************
* Copyright (c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
**************************************************************************
User interface aux0 is available.
Press ENTER to get started.
*************************************************************
*
*
H3C S3610-52P BOOTROM, Version 129
*
*************************************************************
Copyright (c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.
Creation date: Apr
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size
: 128MB
Board checking.......................................LSA1LTSG
SDRAM fast selftest.......................................OK!
Flash fast selftest.......................................OK!
CPLD selftest.............................................OK!
Switch chip selftest......................................OK!
Slot 1/1/1 has no module or get slot type error
Slot 1/1/2 has no module or get slot type error
Slot 1/1/3 has no module or get slot type error
Slot 1/1/4 has no module or get slot type error
PHY selftest..............................................OK!
Please check port leds..............................finished!
The switch Mac is: 000F-E200-2200
4-5
Chapter 4 Starting up the Switch at the Initial Boot
5 2007, 15:47:28
*
*
*
*
*
Advertisement
Table of Contents
