Ch9-Channel 9 Switch Definition - FUTABA 9ZAP - PART1 Manual

CH9—CHANNEL 9 SWITCH DEFINITION
Your PCM 1024Z system has nine channels.
The ninth channel is a switch channel, and the
location of the switch may be selected with this
menu. The default switch is SW(B), with its ON
position at Position 2.
CH9 Switch Selection
In the Model Menu, press the
Channel 9 Switch Selection menu. This will put the switch
display onto the screen. The Factory-Default CH9 Switch
Position is Switch B, Turning On at Position 2
Choose the desired switch location with the A to
H keys. NUL (I) clears the set switch.
CH9 Switch On/Off Direction Definition
To select the ON/OFF direction, press the P and R
left-arrow keys. On and off are toggled with each press of
the button.
Exit this function by pressing the END (N) key.
CH9 key to get the
Switch Selection Keys ( N U L cancels input)
Model Setting Section, Page 50
Model Setting Section
ON
SW(B)
ON/OFF Setting
Keys
• Return to Model
Menu