System Menu Contents - FUTABA 9ZAP - PART1 Manual

SYSTEM MENU
The following controls and menus are used for system-wide settings.
These are settings that are stored for, or may be used for any and all
of the different model setups stored in the PCM 1024Z's memory.
To select any of these keys, first select the horizontal line contain-
ing the item you wish to select, using the B or C keys adjacent to
the left-hand side of the screen. Then, select the desired item with the
F to L keys underneath
Select Line With
These Keys
Listed below are the contents of the System Settings Menu:

System Menu Contents

Item_______Definition____________
MSL . . .Model Selection . . . . . . . . .Use to load desired model's . . . . . 25
VLT. . . .Voltmeter . . . . . . . . . . . .Use adjustable load to . . . . . . . . 26
TAC. . . .Tachometer . . . . . . . . . . .Measures propeller rotational . . . . 27
SRV . . .Servo Test & Bar . . . . . . . .Displays servo positions . . . . . . . 28
Graph Display
TRN . . .Trainer System . . . . . . . . .Sets desired instructional. . . . . . . 29
DTN . . .Data Transfer Function . . . .Copies model data to a n o t h e r . . . . 30
CPM . . .Copy Model Function . . . . .Copies a setup into a second. . . . . 31
CPC. . . .Copy Condition Function . . .Copies a single condition to . . . . . 32
PAR. . . .Parameters. . . . . . . . . . . .Sets Auto-Off and Screen . . . . . . 33
UNA . . .User Name Registration . . . .Set up your name & security . . . . 34
FRQ . . .Transmitter Frequency. . . . .1024ZAPS/HPS Synthesized . . . . 35
Setting
Setting The Frequency Synthesizer. . . .Choosing the desired frequency . . . 36
Receiver
SWT . . .Switch Setting. . . . . . . . . .Use to define switch to. . . . . . . . 37
the display.
Function Selection Keys
Function
settings
check batteries
speed
and cycles
channels
1024Z
memory
another
Contrast
code
systems only (See CAUTION
message)
activate functions
System Section, Page 24
To Home Screen
To Model Menu
To Condition Menu
Page
System Section