FUTABA 9ZAP - PART1 Manual page 74

Trim Mode
Setting
Delay-Rate
Setting
Value of
Subtrim
Trim Mode Selection
To select the trim mode, first press the A key. You
may select the normal mode by pressing the NOR E
Key, or select the ATL mode by pressing the ALT F
key.
Combined/Separate Mode Selection
Select the Combination mode (trim controls all flight
conditions) by pressing the CMB H
Separate mode (trim only controls current flight condi-
tion) by pressing the SEP I key.
Delay setting
To set the delay for trim changing, press the B key
and set the delay with the rate setting keys F to M . The
initial delay value is 0%, but the setting may vary from 0
to 100%.
Trim Notification Beeper
Press the C key to activate the beeper control, then
turn on the beeper by pressing the ON
may turn off the beeper by pressing the OFF G key.
First Step Rate and Repetition Speed
To set the first step parameters, press the R key. Now
Screen 2
Mode Selection Keys
key, or select the
F key. You
Common Conditions Section, Page 72
you may set the step rate with the rate setting keys E to
M. The initial value is 3. but your value may vary from
1 to 50 or left unchanged by using INH.
Now set the repetition speed by pressing the Q key.
The repetition speed may now be set with the rate setting
keys F to M . This is initially set to 60%, but may vary
from 0 to 100%.
Second Step Rate and Repetition Speed
The second step rate is reached when further pressure
is held on the trim switches. To set the second step para-
meters, press the P key. Now you may set the step rate
with the rate setting keys E to M
but your value may vary from 1 to 50 or left unchanged
by using INH.
Now set the repetition speed by pressing the O key.
The repetition speed may now be set with the rate setting
keys F to [M . This is initially set to 80%, but may vary
from 0 to 100%.
Returning
Press the END N key to return to Screen 1. Press
the N key again; the display returns to the condition
menu.
Common Condition Section
Stepping
Rate
First
Repetition
Step
Speed
Stepping
Rate
Second
Step
Repetition
Speed
Return To
Condition Menu
The initial value is 8.