Transmitter Rf Module; Synthesized Frequency Module & Receiver; Optional Synthesized Frequency Module & Receiver (See Caution Message) - FUTABA 9ZAP - PART1 Manual

TRANSMITTER RF MODULE

The PCM 1024Z transmitter is designed to work
with either the FP-TK-FM or the FP-TK-FSS fre-
quency-synthesized Radio Frequency ( R F ) mod-
ules. Other modules may not be used.
It is normal for the module's temperature to
rise during operation.
To remove the module, press
inwards on the top and bottom
tabs and simultaneously pull the
module away from the rear of the
transmitter.
OPTIONAL SYNTHESIZED FREQUENCY MODULE & RECEIVER
The R309DPS synthesized-frequency receiver
and matching transmitter frequency module are
supplied with the PCM1024ZAPS
1024ZHPS systems. The transmitting and receiving
frequency may be easily changed without remov-
ing any crystals or exchanging frequency modules.
The ability to rapidly change frequency is a great
advantage on a crowded flying field or in contest
entry.
The receiver will also work with any other
Futaba 1024 systems. For more information on
the synthesized system, refer to page 37.
CAUTION
and PCM
ter module
know
switching on. If you don't know the fre-
quency, hold the A or R key down as you
switch on power. The transmitting frequency
will be displayed but radio transmission is de-
activated. Once you have determined the fre-
quency,
control device and turn on power to operate
normally.
Manual Introductory Section, Page 22
Manual Introductory Section
If you are using the Synthesized transmit-
FP-TK-FSS, be sure that you
the transmitting frequency
secure the appropriate
before
frequency