FUTABA 9ZAP - PART1 Manual page 72

CONDITION NAME REGISTRATION (CNA)
This function may be used to name the active
flight condition, and can be a maximum of five
characters long. Once entered, the active condition
name is displayed after the model name at the top
center of the screen.
Registering a Condition Name
To register the desired Condition Name, press the
CNA key from the Condition Menu to enter the naming
function as shown below.
Condition Name
Cursor
Use to Select Character in Line
Press the A arrow key to select the registration func-
tion. If necessary, move the cursor to the desired location
within the Condition Name with the G and I keys (left-
and right-arrow).
Select the line containing the desired character with
the O to R keys. Now. use the K and M keys to move
across the line until the cursor is underneath the desired
character. To enter the character into the Condition Name
line, press the ENT H key. Repeat this procedure for
the remaining characters of the desired name. To make
corrections to entered characters, use the G and I keys
to move to the character to be changed, and enter a new
one.
When the name entry is completed, press the END
N key.
Use To Input Desired Character
Common Conditions Section, Page 70
We recommend that you register a name that is
easy to remember for easy confirmation of the
active flight condition.
Select Character Location Keys
Common Condition Section
Choose Desired
Character
Desired Character
Line Selection
Return to
Condition Menu