The System Menu sets up functions of the transmitter,
this does not set up any model data.
Starts and sets the trainer system.
Display adjustment and auto power off setting.
Sets the date and time (system clock setting) and resets the timer.
User name registration and ID Pin number.
Toggle switch type setting (Set when the switch is replaced.)
Hardware reverse/Stick setting/Calibration/Stick mode change.
Adjust the volume of: Key Operation/Error Warning/Trim & Center Click/Timer Event
S.BUS servo setting.
Dual RX Link Power HUB DLPH-2 setting.
Receiver mode setting.
Displays the program version, microSD card information, and product ID.
The output of the transmitter is lowered, for Range checking.
< System Menu >
53