Functions Of System Menu - FUTABA FASSTest-2.4GHz T18SZ Series Instruction Manual

Advanced spread spectrum technology extended system telemetry

Hide thumbs Also See for FASSTest-2.4GHz T18SZ Series:

Table of Contents

SYSTEM MENU

The System Menu sets up functions of the

transmitter: This does not set up any model data.

● Select [SYSTEM] at the home screen and call

the system menu shown below by touching

the RTN button.

● Scrolling the touch sensor to select the

function you want to set and call the setup

screen by touching the RTN button.

● Select the function name

and return to the System

menu by touching the

RTN button or pushing the

Home/Exit button.

System Menu functions table

[DISPLAY]: LCD contrast and back light adjustment.

[SYSTEM TIMER]: Resets the accumulated timer for each model.

[USER NAME]: User name registration.

[SOUND]: Various volume control and low battery setting.

[H/W SETTING]: H/W reverse, stick mode, stick calibration, and switch position.

[INFORMATION]: Displays the program version, SD card information, and language selection.

[RANGE CHECK]: A transmitting output is lowered and the check before a flight is carried out.

[S.BUS SERVO]: S.BUS servo setting.

<SensorTouch™>

●Access setup screen

Scrolling

● Moving cursor

Table of Contents