Application, Export And Modification; Usage Precaution - FUTABA 7C-2.4GHZ Instruction Manual

Application, Export, and Modification
1.This product may be used for model airplanes or helicopters. It is not intended for use in any application other than the
control of models for hobby and recreational purposes. The product is subject to regulations of the Ministry of
Radio/Telecommunications and is restricted under Japanese law to such purposes.
2. Exportation precautions:
(a) When this product is exported from the country of manufacture, its use is to be approved by the laws governing the
country of destination which govern devices that emit radio frequencies. If this product is then re-exported to other
countries, it may be subject to restrictions on such export. Prior approval of the appropriate government authorities may
be required. If you have purchased this product from an exporter outside your country, and not the authorized Futaba
distributor in your country, please contact the seller immediately to determine if such export regulations have been met.
(b) Use of this product with other than models may be restricted by Export and Trade Control Regulations, and an appli-
cation for export approval must be submitted. This equipment must not be utilized to operate equipment other than radio
controlled models.
3. Modification, adjustment, and replacement of parts: Futaba is not responsible for unauthorized modification, adjustment, and
replacement of parts on this product. Any such changes may void the warranty.
FCC Information
To assure continued FCC compliance:
(1) Any changes or
operate the equipment.
FCC Label Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The RBRC
Corporation of America is voluntarily participating in an industry-wide program to collect and recycle these
batteries at the end of their useful lives, when taken out of service within the United States. The RBRC
program provides a convenient alternative to placing used nickel-cadmium batteries into the trash or municipal
waste system, which is illegal in some areas.
(for USA)
You may contact your local recycling center for information on where to return the spent battery. Please call
1-800-8-BATTERY for information on Ni-Cd battery recycling in your area. Futaba Corporation of Americaís involvement
in this program is part of its commitment to protecting our environment and conserving natural resources.
RBRC is a trademark of the Rechargeable Battery Recycling Corporation.
Usage Precautions
(1) Prior to utilizing any radio control system, it is strongly recommended that you read and abide by the Safety Code
created by the Academy of Model Aeronautics as well as any site
will greatly increase your enjoyment of the hobby.
(2) In order to maintain complete control of your aircraft it is important that it remains visible at all times. Flying behind
large objects such as buildings, grain bins, etc. is not suggested. Doing so may result in the reduction of the quality of the
radio frequency link to the model.
(3) Please do not grasp the transmitter module's antenna during
frequency transmission.
not expressly approved by the grantee of this device could void the user's authority to
™ SEAL on the nickel-cadmium battery contained in Futaba products indicates that Futaba
rules and regulations that might exist. Doing so
. Doing so may degrade the quality of the radio
4
™