AILE-RUDD mixing (ACRO):
Adjustability:
• Rate: -100% to +100, with a default of +50% (one-half of the rudder range is achieved when the A
pulled to provide full left or right aileron.)
GOAL of EXAMPLE:
Activate AILE-RUDD mixing. Adjust
rudder travel to 45%.
Where next?
AILE-RUDD mixing is a pre-programmed linear mix. This mix is used to mix
rudder operation with aileron operation automatically, to make realistic
coordinated turns. It is especially effective when turning and banking scale
models or large models that resemble full-sized aircraft.
STEPS:
Open the AILE-RUDD function.
Activate the function.
Adjust the travels as needed.
(Ex: +45%)
Close menu.
View additional setups on the internet:
51
ILERON
INPUTS:
for 1 second.
(If basic,
to AILE-RUDD.
to 45%.
www.futaba-rc.com\faq\faq-7c.html.
S
is
TICK
again.)