Introduction; Support And Service; Application, Export, And Modification - FUTABA FMT-03 Instruction Manual

Thank you for purchasing a Futaba
C system. In order for you to make the best use of your system and to fly safely, please read this
manual carefully.
*FASSTest: Futaba Advanced Spread Spectrum Technology extend system telemetry
Due to unforeseen changes in production procedures, the information contained in this manual is
subject to change without notice.
101 Electronics Boulevard, Huntsville, Alabama 35824, U.S.A
Please contact your Futaba importer in your region of the world to assist you with any questions,
problems or service needs.
Please recognize that all information in this manual, and all support availability, is based upon
the systems sold in North America only. Products purchased elsewhere may vary. Always contact
your region's support center for assistance.

Application, Export, and Modification

1. This product may be used for unmanned aerial vehicle use. It is not intended for use in any
application other than the control of models for unmanned aerial vehicle. The product is subject
to regulations of the Ministry of Radio/Telecommunications and is restricted under Japanese law
to such purposes.
2. Exportation precautions:
(a) When this product is exported from the country of manufacture, its use is to be approved by
the laws governing the country of destination which govern devices that emit radio frequencies. If
this product is then re-exported to other countries, it may be subject to restrictions on such export.
Prior approval of the appropriate government authorities may be required. If you have purchased
this product from an exporter outside your country, and not the authorized Futaba distributor in
your country, please contact the seller immediately to determine if such export regulations have
been met.
(b) Use of this product with other than models may be restricted by Export and Trade Control
Regulations, and an application for export approval must be submitted. This equipment must not
be utilized to operate equipment other than radio controlled models.
3. Modification, adjustment, and replacement of parts: Futaba is not responsible for unauthorized
modification, adjustment, and replacement of parts on this product. Any such changes may void
the warranty.
<Introduction>
4

INTRODUCTION

®
FASSTest-2.4GHz
FOR SUPPORT :
(PROGRAMMING AND USER QUESTIONS)
FUTABA Corporation of America
Fax: 1-256-461-1059
Phone: 1-256-461-9399
OUTSIDE NORTH AMERICA
*
FMT-03 series digital proportional R/