Transmitter Controls - Airplane - FUTABA 7C-2.4GHZ Instruction Manual

TRANSMITTER CONTROLS - AIRPLANE

SW(F)
Snap Roll or
Trainer Switch
SW(E)
Landing Gear
Switch
/CH5
SW(B)
Rudder Dual Rate Switch
/CH7
SW(A)
Elevator Dual Rate Switch
/TH-CUT/P-MIX/TIMER
Rudder
/Throttle
Stick
Throttle
Trim Lever
Rudder
Trim Lever
Edit Keys
This figure shows the default switch assignments for a Mode 2 system as supplied by the factory.
You can change many of the switch positions or functions by selecting a new position within
the setting menu for the function you wish to move. (Example: move aileron dual rates to switch G
* Power LED blinks to indicate if any mix switches are activated.
Carrying Handle
Power
LED*
Hook
(for optional neckstrap)
Power Switch
(Up position: ON)
to create triple rates. See p. 33 for details.)
11
VR
Flap Trim Control
Antenna
This controls CH6, and if flaperon mixing
is activated controls the flap.
SW(G)
Elevator - Flap Mixing or
Airbrake Mixing Switch
SW(D)
Aileron Dual Rate Switch
Edit keys
LCD Panel
Elevator
/Aileron
Stick
Elevator Trim Lever
Aileron Trim Lever
Dial