Frothing Milk - Gaggia KIII-D Operating Instructions Manual

Frothing milk

• Fill a cup or small jug half way with cold milk.
• Place the receptacle under the steam wand so as to
place the nozzle of the steam wand in the milk to be
heated. Turn the knob slowly anti-clockwise while
gently rotating the receptacle. Ensure that the steam
nozzle remains just below the milk surface at all
times during this step. (Fig. 16)
• When a sufficient amount of froth has been
dispensed, turn the knob clockwise.
Caution:
The steam wand is hot after use. Do not touch it with
bare hands but use a cloth.
Note:
Do not wait too long before cleaning the steam wand. Milk deposits are hard to remove.
Once the froth has been made, we recommend placing a cup with water under the steam
wand and starting the steam dispensing function again for a few - seconds. This way,
any residue of milk will be easily removed from the nozzle.
Make sure the lateral hole of the steam wand is not
clogged (Fig. 17).
0
Fig. 16
Fig. 17