Preliminary Operations - Gaggia KIII-D Operating Instructions Manual

Caution. Follow the instructions given below in order to prevent damage to the
machine:
• Do not install or store the machine close to sources of heat.
• Rest the machine on a level surface that is resistant to dampness and heat.
The coffee machine is fitted with anti-slip feet. Beware that worktops are coated or
finished with a variety of different materials and protective products, some of which may
contain aggressive substances that are likely to damage or soften the feet. If in doubt,
place an anti-slip mat under the machine.
• Do not expose the coffee machine to temperatures lower than  °C, as the water
remaining inside the water heating system may freeze and cause damage to the
appliance.
• Route the power cable in such a way as to avoid the risk of being caught up in it.
Keep the power cable away from sharp edges and sources of heat.
• Use cold tap water only to fill the water tank.
Use fresh water at all times. Do not use fizzy mineral water or other liquids.
• To prevent the pump from working with no load and overheating, the water tank should
never be left without water.
Caution
The manufacturer accepts no liability for damage caused by:
• Improper use outside the defined operating parameters;
• Repairs carried out by anyone other than authorized service centres;
• Tampering with the power cable;
• Tampering with any component of the machine;
• Use of non original spare parts and accessories;
In such cases the warranty shall be null and void.

Preliminary operations

Unpacking:
Check the appliance for damage after you have taken it out of its packing.
If in doubt, do not use the appliance and contact the retailer.
The packaging materials should never be left within the reach of children since these
materials can pose a hazard. They should be disposed of or stored in accordance with local
environment protection regulations.
Assembling the parts of the machine that are supplied separately.
Essential and safety components of the coffee machine are factory-assembled. Some
secondary elements of the appliance may be supplied in a separate packaging. The user
should assemble these parts in accordance with the assembly instructions given in this
booklet.