Gaggia KIII-D Operating Instructions Manual page 25

• Remove the cable plug from the power outlet.
• Lift the water tank and remove it by pulling upwards.
Remove the tank lid (Fig. 5).
• Fill the tank with cold water (Fig. 6). Put the water
tank back in place and close the lid.
• Connect the cable plug to the power outlet.
• Press the ON/OFF switch. The buttons with the cup
symbols will start blinking.
Note
Some water may dribble out of the capsule holder while
the water is being heated.
This is perfectly normal and does not jeopardize the
operation of the appliance.
Caution
The appliance will start heating water as soon as it is
switched on. If you notice that the heating
process is slow, then the water in the machine may
already be hot. In this case, there may be a danger of
burns from sprinklings of hot water.
• Rotate the knob anti-clockwise to dispense a cup of
hot water. (Fig. 7)
• When the cup is full, rotate the knob fully clockwise.
The flow of hot water will stop.
• Press the ON/OFF switch to turn OFF the machine.
Before making your first cup of coffee, read these
instructions and the information regarding the brand
new technology incorporated in this appliance.
This coffee machine uses a single-cup capsule concept.
The appliance operates with "CAFFITALY SYSTEM"
capsules of fresh aromatic coffee. To provide a full,
delicious aroma, one capsule makes one cup of coffee.
Fig. 5
Fig. 6
Fig. 7
5