Mirror to front panel car-
rier
Thread-locking compound:
Mechanical thread lock
5 Nm
Removing and installing
number-plate carrier
Removing number-plate
carrier
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove the rear seat (
Disconnect plug 1.
Protect the plug on the motor-
cycle to prevent the ingress of
foreign matter.
53).
Remove screws 2 and remove
the number-plate carrier. Work
the cable through opening 3.
Install the rear seat (
Installing number-plate
carrier
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove the rear seat (
6
89
54).
z
53).