BMW S 1000 RR Rider's Manual page 95

Seat the side panel in the rub-
ber buffer at position 5.
Install screws 2, 3 and 4.
Install screw 1.
Installing front flashing
turn indicator
Remove screw 1 on the in-
board side of the right side
panel.
The procedure described
here for the right side apply
applies by analogy to the left side
panel.
Remove screws 2, 3 and 4.
Pull the fairing side panel at
position 5 to disengage it from
the rubber buffer and remove.
Work the cable through the
fairing side panel.
6
91
z