BMW S 1000 RR Rider's Manual page 58

seat, upholstered side down,
4
on a clean surface.
54 Installing rear seat
z
Engage the rear seat in
mounts 2 on left and right,
then apply pressure to the rear
of the seat to push it down.
Lock the seat lock with the ig-
nition key.
Remove the front seat
Push the upholstery of the
front seat forward slightly
above screws 1 and hold it in
this position.
Remove the screws.
Push the seat forward and
lift it at the rear to remove.
Take care not to let the screws
scratch the trim panels.
Place the seat, upholstered
side down, on a clean surface.
Install the front seat
Engage the front seat in
mount 2, then lower the rear of
the seat to bring the holes into
alignment with screw holes 3.
Take care not to let the screws
scratch the trim panels.