Anti-Theft Alarm Warnings - BMW S 1000 RR Rider's Manual

DTC intervention
3
DTC warning light quick-
flashes.
30
The DTC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The warning light flashes
for longer than DTC intervention
lasts. This affords the rider visual
feedback on control intervention
even after the critical situation
has been dealt with.
Self-diagnosis not
completed
z
DTC warning light slow-
flashes.
Possible cause:
Self-diagnosis did not complete,
so the DTC function is not avail-
able. The engine must be run-
ning and the motorcycle must
reach a speed of at least 5 km/h
in order for DTC self-diagnosis to
complete.
Pull away slowly. Bear in mind
that the DTC function is not
available until self-diagnosis has
completed.
DTC switched off
DTC warning light shows.
Possible cause:
The rider has switched off the
DTC system.
Activate the DTC function
( 43).
DTC fault
DTC warning light shows.
Possible cause:
The DTC control unit has detec-
ted a fault.
You can continue to ride. Bear
in mind that the DTC function
is not available or the function-
ality might be subject to certain
restrictions. Bear in mind the
more detailed information on
situations that can lead to a
DTC fault ( 99).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Anti-theft alarm
warnings
with anti-theft alarm (DWA)
OE