BMW S 1000 RR Rider's Manual page 124

ceptible, and repeat this opera-
9
tion several times.
120 Remove the rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
z
Remove axle nut 1 with wash-
er.
Slacken locknuts 3 on left and
right.
Slacken adjusting screws 2 on
left and right.
Remove adjusting plate 4 and
push the axle in as far as it will
go.
Remove quick-release axle 5,
supporting the rear wheel as
you do so.
Set down the rear wheel in the
swinging arm and remove ad-
justing plate 6.
Roll the rear wheel as far for-
ward as possible and disen-
gage chain 7 from the sprock-
et.
Roll the rear wheel back and
clear of the swinging arm, and
at the same time work brake-