Electronic Immobiliser Ews; Clock - BMW S 1000 RR Rider's Manual

Electronic immobiliser
EWS
The motorcycle's electronics
exchange certain continuously
changing signals with the elec-
tronics in the key; these signals
are specific to your motorcycle
and they are transmitted via the
ring aerial in the ignition lock.
The ignition is not enabled for
starting until the engine control
unit has recognised the key as
"authorised" for your motorcycle.
A spare key attached to
the same ring as the ig-
nition key used to start the en-
gine could "irritate" the electron-
ics, in which case the enabling
signal for starting is not issued.
EWS
The warning appears in the
multifunction display.
Always keep the spare key sep-
arately from the ignition key.
If you mislay a key you can have
the key in question barred by
your authorised BMW Motorrad
dealer. In order to have a key
barred you must bring along all
the other keys belonging to the
motorcycle.
The engine cannot be started by
a barred key, but a key that has
been barred can subsequently be
reactivated.
You can obtain replacement/extra
keys only through an authorised
BMW Motorrad dealer. The keys
are part of an integrated security
system, so the dealer is under an
obligation to check the legitimacy
of all applications for replace-
ment/extra keys.

Clock

Setting clock
Attempting to set the clock
while riding the motorcycle
can lead to accidents.
Set the clock only when the mo-
torcycle is stationary.
Switch on the ignition.
Press and hold down button 2
until the hours number 3
flashes.
Press button 1 to step the
hours reading up.
Press button 2 to step the
hours reading down.
When the hours reading is cor-
rect, hold down button 2 until
minutes reading 4 flashes.
Press button 1 to step the
minutes reading up.
4
37
z