BMW S 1000 RR Rider's Manual page 123

Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the front forks.
Raise the front wheel, insert
quick-release axle 2 and tight-
en to specified torque.
Quick-release axle in
threaded bush
50 Nm
Tighten right axle clamping
screws 1 to the specified tight-
ening torque.
Clamping screws in axle
holder
19 Nm
Remove the front-wheel stand
and the auxiliary stand.
Ease the brake calipers on to
the brake discs.
Tighten screws 3 on left and
right to the specified tightening
torque.
Radial brake caliper to
axle mount
38 Nm
with BMW Motorrad Race
OE
ABS
Clip the ABS sensor cable into
retaining clips 2.
Insert the ABS sensor into its
bore and install screw 1.
Remove the adhesive tape
from the wheel rim.
Firmly pull the handbrake lever
until the pressure point is per-
9
119
z