BMW S 1000 RR Rider's Manual page 49

menu disappears from the dis-
play.
The mode selected in this way
is retained with the engine-
characteristic adaptations, ABS
and DTC settings even after
the ignition has been switched
off.
Activating SLICK mode
Remove the front seat (
Switch off the ignition.
The SLICK mode is set up
for racing slicks and the as-
sumption on which the parameter
settings are based is that tyre-
to-surface grip is of the very high
level generally encountered only
on race tracks. This calls for a
correspondingly high level of skill
and experience on the part of the
rider.
Activate SLICK mode only on
race tracks and only when run-
ning the motorcycle on racing
slicks.
54).
Dirt and moisture can pen-
etrate the open plug and
lead to malfunctions.
Reinstall the cap after removing
the coding plug.
Remove cap of plug 1.
To do so, press retainer 2 and
pull the cap up.
Install the coding plug.
Switch on the ignition.
4
45
z