BMW S 1000 RR Rider's Manual page 55

To increase damping: Use the
tool from the on-board kit to
turn the adjusting screw in the
appropriate direction so that
mark 2 points to a higher read-
ing on the scale.
To reduce damping: Use the
tool from the on-board kit to
turn the adjusting screw in the
appropriate direction so that
mark 2 points to a lower read-
ing on the scale.
Rebound stage, basic
setting, front
Position 2 (comfortable set-
ting with rider 85 kg)
Position 5 (normal setting
with rider 85 kg)
Position 8 (sports setting
with rider 85 kg)
Adjusting compression-
stage damping for rear
wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Adjust compression-stage
damping for long bump
travel (low speed) by turning
adjusting screw 1 and adjust
compression-stage damping for
short bump travel (high speed)
by turning adjusting ring 2.
4
51
z