BMW S 1000 RR Rider's Manual page 125

caliper carrier 8 to the rear and
remove.
The sprocket and the
spacer sleeves on left
and right are loose fits in the
wheel. Make sure that these
parts are not damaged or lost on
removal.
Installing rear wheel
Possible malfunctions when
ABS and DTC systems in-
tervene if non-standard wheels
are installed.
See the information on the effect
of wheel size on the ABS and
DTC systems at the start of this
chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Roll the rear wheel into the
swinging arm as far as neces-
sary to permit the brake-caliper
carrier to be inserted.
Insert the brake-caliper carrier
into guide 9.
Roll the rear wheel further into
the swinging arm, while push-
ing brake-caliper carrier 8 for-
ward at the same time.
9
121
z