BMW S 1000 RR Rider's Manual page 127

wheel stand and the rear wheel
can topple.
Place the motorcycle on its
centre stand or another auxiliary
stand before lifting the front
wheel with the BMW Motorrad
front-wheel stand.
Place the motorcycle on an
auxiliary stand; BMW Motorrad
recommends the BMW Motor-
rad auxiliary stand.
Install the auxiliary stand at rear
wheel ( 124).
Use basic stand (0 402 241)
and adapters (2 152 839).
Insert adapter pins
(2 152 840) 1 into the front
suspension on left and right.
Turn brackets 2 long ends in.
Adjust adapters 3 to the width
of the pins inserted in the front
suspension.
Set the height of the auxiliary
stand to raise the front wheel
slightly clear of the ground.
Engage the auxiliary stand in
the front suspension and apply
even pressure to push it down
to the ground.
9
123
z