BMW S 1000 RR Rider's Manual page 135

LED rear light
If the number of LEDs in the rear
light that have failed exceeds the
number stated in the Technical
Data below, the rear light must
be replaced. Under these cir-
cumstances:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Maximum number of de-
fective LEDs in rear-light
unit
1
Replacing number-plate
light
Pull parking-light bulb socket 1
out of the light housing.
Pull the bulb out of the bulb
socket.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulb for number-plate
light
W5W / 12 V / 5 W
9
131
z