Chapter 2
| Installation Overview
AP Installation Tasks
AP Installation Tasks
Task 1
Task 2
Follow these tasks to install the AP in your network. For full details on each task, go
to the relevant chapter or section by clicking on the link.
Unpack package and check contents
Unpack your AP and check the package contents to be sure you have received all
the items.
Before installing your AP, be sure to review all the safety statements and guidelines
in the Regulatory and Safety Information document.
Mount the AP
After planning your installation, mount the unit on a pole, mast, or tower using the
mounting bracket. Also install the external antennas required for your wireless
service.
Go to the chapter
Figure 6: Installing the AP on a Pole
1
Attach one part of the bracket to the AP.
2
Attach the other parts of the bracket to the pole.
3
Link the two bracket parts together to secure the AP to the pole.
"AP Chassis"
3
1
2
– 18 –