Checking the electrolyte level
(03_14)
Remove the battery.
Check that the fluid level is be-
tween the two "MIN"and "MAX"
notches printed on the side of
the battery.
Otherwise:
Unscrew and remove the caps
03_14
of the cells.
NOTE
USE DISTILLED WATER ONLY TO
TOP-UP ELECTROLYTE FLUID. DO
NOT EXCEED THE "MAX" MARK,
SINCE THE LEVEL INCREASES DUR-
ING RECHARGE.
Restore the level adding distilled
water only.
Refit the cell caps.
CAUTION
AFTER
TOPPING-UP,
CELL CAPS ADEQUATELY.
80
Controle van het elektrolytpeil
(03_14)
Verwijder de accu.
Controleer of het vloeistofpeil
zich tussen de twee strepen
"MIN" en "MAX", op de zijkant
van de accu, bevindt.
Anders handelt men als volgt:
Draai de doppen van de ele-
menten los en verwijder ze.
N.B.
VOOR HET BIJVULLEN VAN DE ELEK-
TROLYTVLOEISTOF, GEBRUIKT MEN
ENKEL
GEDESTILLEERD
OVERSCHRIJDT NOOIT DE "MAX"
REFERENTIE, OMDAT HET PEIL TIJ-
DENS HET LADEN VERHOOGT.
Herstel het peil door enkel ge-
destilleerd water toe te voegen.
Herplaats de doppen van de
elementen.
LET OP
REFIT
THE
NA HET BIJVULLEN HERPLAATST
MEN CORRECT DE DOPPEN VAN DE
ELEMENTEN.
WATER.