Changing The Rear Light Bulb - APRILIA RS 250 - 1998 Manual

CHANGING
THE REAR LIGHT BULB
c
Before changing a bulb, check
the fuses, see p. 72 (CHANGING
THE FUSES) and the effective operation
of the stoplight switches, see p. 74
(CHECKING THE SWITCHES).
Carefully read p. 75 (BULBS).
78 use and maintenance RS 250
Position the vehicle on the stand, see
p. 46 (POSITIONING THE VEHICLE ON
THE STAND).
Unscrew and remove the two screws (1).
Seize and remove the protection glass
(2).
Press the bulb (3) slightly and rotate it
anticlockwise.
Extract the bulb from its seat.
c
Insert the bulb in the bulb soc-
ket, making the two bulb pins
coincide with the relevant guides on the
socket.
Correctly install a new bulb of the same
type.
a
Upon reassembly, tighten the
two screws (1) moderately and
carefully, to avoid damaging the
protection glass.