APRILIA RS 250 - 1998 Manual page 20

SETTING THE RED LINE THRESHOLD
(WITH ENGINE OFF ONLY)
When the maximum rpm set is exceed-
ed, the red line warning light LED " max "
(2) positioned on the dashboard starts
blinking.
C
If the push button is pressed for less
than one second, the pointer (1) of the
revolution counter (1) shifts to the red line
value set for 3 seconds, after which it re-
turns to its initial position.
20 use and maintenance RS 250
For the setting:
C
Press the push button
press it again within 3 seconds. The
pointer (1) moves increasing the value
by 1000 rpm at each step, as long as
is kept pressed; when it has reached the
maximum value, it starts again from the
beginning.
C
Press the push button
sired rpm value has been set.
C
If the push button is released and
then pressed again within 3 seconds, in-
termittently, the pointer (1) moves in-
creasing the value by 100 rpm per pulsa-
tion; when it has reached the maximum
value, it starts again from the beginning.
To confirm, release the push button
After 3 seconds, the red line threshold
, release it and
setting is stored.
c
The setting is confirmed by the
C
coming on of the red line warn-
ing light LED " max " (2).
until the de-
C
.