Changing The Headlight Bulbs - APRILIA RS 250 - 1998 Manual

CHANGING
THE HEADLIGHT BULBS
Carefully read page 75 (BULBS).
Position the vehicle on the stand, see
p. 46 (POSITIONING THE VEHICLE ON
THE STAND).
c
Before changing a bulb, check
the fuses, see p. 72 (CHANGING
THE FUSES).
The headlight contains:
One high beam bulb (1) (right side).
One parking light bulb (2) (lower side).
One low beam bulb (3) (left side).
To change the bulbs, proceed as follows:
76 use and maintenance RS 250
PARKING LIGHT BULB
a
To extract the bulb socket, do
not pull the electric wires.
Working on the rear side of the front part
of the fairing, seize the bulb socket (4),
pull it and remove it from its seat.
Withdraw the parking light bulb (5) and
replace it with one of the same type.
HIGH BEAM BULB
Working on the rear right side of the front
part of the fairing, move the protection
element (6) with your hands.
Withdraw the electric terminal (7).
Release the check spring (8) positioned
at the rear of the bulb socket (9).
Extract the bulb (10) and replace it.
c
Insert the bulb in the bulb soc-
ket, making the relevant positio-
ning seats coincide.