Table of Contents
Advertisement
INSTRUMENTS AND INDICATORS TABLE
Description
Direction indicator warning light
High beam warning light
Revolution counter ( rpm )
Programmable red line
warning light LED
Parking light and low beam
warning light
Side stand down warning light
Mixer oil reserve warning light LED
Neutral indicator warning light
16
use and maintenance RS 250
Function
c
(
)
Blinks when the direction indicators are on.
a
Comes on when the headlight is in "high beam" position or when the high beam signalling is
(
)
operated.
Indicates the number of revolutions of the engine per minute.
a
Never exceed the engine max. speed rate, see p. 45 (RUNNING-IN).
Blinks when the max. rpm set by the user is reached, see p. 20 (RED LINE WARNING
LIGHT).
It comes on when the engine max. rpm threshold setting is confirmed and whenever the ig-
( max )
nition key is rotated to position "
COMPUTER).
p
Comes on when the lights are on.
(
)
\
(
)
Comes on when the side stand is down.
Comes on, for about 0.5 seconds, whenever the ignition switch is brought to position "
thus testing the correct operation of the led.
If the light does not come on in this phase, contact an aprilia Official Dealer.
j
(
)
a
If the warning light LED comes on during the normal operation of the engine,
this means that the mixer oil reserve is being used; in this case, provide for top-
ping up, see p. 33 (MIXER OIL TANK).
q
(
)
Comes on when the gear is in neutral.
n
", for about three seconds, see p. 18 (MULTIFUNCTION
n
",
Hide quick links:
Advertisement
Table of Contents
