Changing The Rear Light Bulb - APRILIA RS 50 Workshop Manual

Electrical Equipment
CHANGING THE FRONT AND REAR
DIRECTION INDICATOR BULBS
Carefully read (BULBS).
NOTE
Before changing a bulb, check the fuse, see
(CHANGING THE FUSE).
Position the vehicle on the stand.
Unscrew and remove the screw (1).
NOTE
While removing the protection screen, pro-
ceed carefully in order not to break the cog.
Remove the protection screen (2).
NOTE
Upon reassembly, correctly position the
protection screen in its seat.
CAUTION
Tighten the screw (1) moderately and carefully, to
avoid damaging the protection screen.
Press the bulb (3) slightly and rotate it anticlockwise.
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket, making the
two bulb pins coincide with the relevant guides on the
socket.
Correctly install a new bulb of the same type.
NOTE
If the bulb socket (4) goes out of its seat,
insert it correctly, making the bulb socket opening
coincide with the screw seat.
CHANGING
THE REAR LIGHT BULB
Carefully read (BULBS).
NOTE
Before changing a bulb, check the fuse, see
(CHANGING THE FUSE) and the effective operation
of the stoplight switches, see (CHECKING THE
SWITCHES).
Position the vehicle on the stand.
Unscrew and remove the two screws (5).
Remove the protection screen (6).
NOTE
Upon reassembly, correctly position the
protection screen in its seat.
CAUTION
Upon reassembly, tighten the two screws (5)
moderately and carefully, to avoid damaging the
protection screen.
Press the bulb (7) slightly and rotate it anticlockwise.
Extract the bulb from its seat.
6-26
Release 00 2000-11
2
3
5
chap. 6
RS 50
1
4
6