CAUTION
Tighten the screw (12) moderately and
c a r e f u l l y , t o a v o i d d a m a g i n g t h e
protection screen.
Press the bulb (14) slightly and rotate it
◆
anticlockwise.
Extract the bulb from its seat.
◆
NOTE
Insert the bulb in the bulb socket,
making the two bulb pins coincide with the
relevant guides on the socket.
Correctly install a new bulb of the same
◆
type.
NOTE
If the bulb socket (15) goes out of
its seat, insert it correctly, making the bulb
socket opening coincide with the screw
seat.
CHANGING
THE REAR LIGHT BULB
Carefully read p. 67 (BULBS).
NOTE
Before changing a bulb, check
the fuse, see p. 63 (CHANGING THE
FUSE) and the effective operation of the
stoplight switches, see p. 65 (CHECKING
THE SWITCHES).
Position the vehicle on the stand.
◆
Unscrew and remove the two screws (1).
◆
Remove the protection screen (2).
◆
NOTE
Upon reassembly, correctly
position the protection screen in its seat.
CAUTION
Upon reassembly, tighten the two
screws (1) moderately and carefully, to
avoid damaging the protection screen.
Press the bulb (3) slightly and rotate it
◆
anticlockwise.
Extract the bulb from its seat.
◆
NOTE
Insert the bulb in the bulb socket,
making the two bulb pins coincide with the
relevant guides on the socket.
Correctly install a new bulb of the same
◆
type.
use and maintenance RS 50 Tuono
69