APRILIA RS 250 - 1998 Manual page 21

MULTIFUNCTION (RIGHT DISPLAY)
The right display (multifunction) includes
the coolant temperature in ˚C (˚F) (1) and
the digital clock (2) as standard settings.
c
When the engine is cold, the
COLD
writing " " blinks.
By pressing the push button
ing functions can be obtained in se-
quence:
Standard setting:
temperature in ˚C and digital clock
D
Battery voltage (V BATT)
D
Hour setting
D
Minute setting
D
˚C or ˚F setting
D
, the follow-
STANDARD SETTING:
COOLANT TEMPERATURE
AND DIGITAL CLOCK
The coolant temperature value (1) is
shown in the upper part of the right dis-
play.
It is possible to switch from ˚C to ˚F and
viceversa, see p. 22 (SETTING ˚C OR ˚F).
When the temperature is below 35˚C
(95˚F), the writing "
the right display.
When the temperature is over 115˚C
(239˚F), the value (1) blinks on the right
display, even if a function different from
the standard setting has been set.
When the temperature is over 130˚C
(266˚F), the writing "
on the right display.
Thermometer range: 0 - 130˚C (32 - 266
˚F).
The digital clock (2) appears in the lower
part of the right display.
To set or modify hour and minutes, see p.
22 (SETTING THE HOUR) and p. 22
(SETTING THE MINUTES).
BATTERY VOLTAGE - VBATT
Cold
" (1) blinks on
LLL
" (1) appears
D
If the push button is pressed once, the
battery voltage expressed in volt (3) ap-
pears in the lower part of the right dis-
play, while the coolant temperature (1)
is displayed in the upper part.
The writing "V BATT" (4) is displayed.
The recharge circuit functions correctly
if at 4000 rpm the battery voltage with
low beam on is included between 13
and 15 V.
use and maintenance RS 250 21