APRILIA RS 250 - 1998 Manual page 19

B
Press the push button
unit of measurement from " km " to " mi "
(from " km " to " MPH ") and viceversa.
To confirm the setting, press the push
A
button for about 5 seconds.
SETTING THE INSTANTANEOUS, MAXI-
MUM AND AVERAGE SPEED (LEFT
c
DISPLAY)
Two seconds after the vehicle
has started moving, the instanta-
neous speed is automatically shown on
the display, even if a different function
is set.
When the ignition key is rotated to position
n
" ", the instantaneous speed (1) and the
partial number of kilometres/miles cov-
ered (trip 1) (2) appear on the left display.
Resetting "trip 1" (2): with the odometer
set on the instantaneous speed function,
R
press the push button for about 2 sec-
onds.
to change the To display the maximum speed (3) and
the distance "trip 1" (2), press the push
B
button
The writing "V max" (4), the maximum
speed (3) and the distance "trip 1" (2) are
displayed.
Resetting the maximum speed (3): with
the odometer set on the "V max" function,
press the push button
onds. c
The measurement of the maxi-
mum speed is relevant to the dis-
tance covered from the last setting to
zero fo the maximum speed itself. The
distance "trip 1" (2) shown on the display
indicates the number of kilometres/miles
covered from the last setting to zero.
To display the average speed (5) and the
distance "trip 2" (6), press the push but-
B
ton again for about 1 second.
for about 1 second.
R
for about 2 sec-
The writing "AVS" (7), the average
speed (5) and the distance "trip 2" (6) are
displayed.
Resetting the average speed (5) and the
distance "trip 2" (6): with the odometer set
on the "AVS" function, press the push but-
R
ton c for about 1 second.
The measurement of the average
speed is relevant to the distance
"trip 2" (odometer).
The distance "trip 2" (6) shown on the
display indicates the number of kilome-
tres/miles covered from the last setting
to zero.
If more than 1000 km (625 mi) are cov-
ered without setting "trip 2" to zero, the
value of the average speed will be
wrong.
To display the instantaneous speed (1)
and the distance "trip 1" (2), press the
B
push button again.
use and maintenance RS 250 19