Multifunction Computer - APRILIA RS 250 - 1998 Manual

MULTIFUNCTION COMPUTER

When the ignition key (1) is rotated to po-
n
sition " ", the following warning lights
come on on the dashboard:
– red line warning light LED ( max ) (2).
– red mixer oil reserve warning light LED
j
( ) (3) - for about 0.5 seconds.
The pointer (4) of the revolution counter
shifts to the maximum value (rpm) set by
the user.
After about 3 seconds the red line warning
light LED ( max ) (2) goes off; the pointer
(4) of the revolution counter returns to its
initial position. In this way the component
operation is tested.
a
After the first 1000 km (625 mi)
and successively every 4000 km
(2500 mi), the writing "SERVICE"
(5) appears on the right display. In this
case contact an aprilia Official Dealer,
who will carry out the operations indi-
cated in the regular service intervals
18 use and maintenance RS 250
chart, see p. 47 (REGULAR SERVICE IN-
TERVALS CHART).
To make the writing "SERVICE" disap-
pear, press the "LAP" push button (6)
and then the push button
them pressed for about 5 seconds.
With the ignition key (1) in position
standard settings on the dashboard are
the following:
Right display : Clock (7), coolant temper-
ature in ˚C (8).
Left display : Instantaneous speed in
km/h (9), trip 1 (trip odometer) (10), total
kilometres/miles odometer (11).
Upon installation of the battery or of the
20A fuse:
The revolution counter pointer (4) makes
12 clockwise clicks, thus checking the
operation of the revolution counter itself.
The instantaneous, maximum and aver-
age speed function is set in " km/h ".
The digital clock is set to zero.
c
The red line is set at 6000 rpm.
If necessary, carry out the ap-
propriate adjustments.
R
and keep
SEGMENT OPERATION CHECK
Press the push buttons
n
the
" "
same time.
Rotate the ignition key (1) from position
m
" " to position "
All the segments will remain on until the
push buttons
SWITCHING FROM km TO mi (from
km/h to MPH) AND VICEVERSA (LEFT
DISPLAY)
Press the push button
about 5 seconds, all the writings (12) on
the left display start blinking.
Release the push button
A B
and at the
n
".
A B
and are released.
A
until, after
A
.