APRILIA RS 250 - 1998 Manual page 23

CHRONOMETER (RIGHT DISPLAY)
The chronometer makes it possible to
measure the time per lap with the vehicle
on a racetrack and to store the data, in
such a way as to be able to consult them
successively.
When the "CHRONOMETER" function
has been selected, it is not possible to re-
call the following functions:
Maximum speed " V max "
Average speed " AVS "
Distance "trip 2".
To operate the chronometer, press the
"LAP" push button (1) and, within 0.7
seconds, the push button
To start timing, press the "LAP" push
button (1) and release it immediately.
To store the time acquired, press the
"LAP" push button (1).
The "LAP" push button (1) is not enabled
for 10 seconds and the last time stored (2)
is shown on the display.
After which, the chronometer with the cur-
rent timing (3) is displayed, starting from
10 seconds.
To display the first time stored (4), press
the push button
To be able to see the stored times in se-
quence, press the "LAP" push button (1).
The writings
D
. are displayed.
To start timing again, press the push but-
B
ton .
B
.
L1 L2 L3 L4
, , , , etc. (5)
c
It is possible to store max. 40
times, after which the "LAP"
push button (1) is not effective any
longer.
To set the memory to zero, press the
A
push button and the "LAP" push but-
ton (1) at the same time for 2 seconds.
To leave the chronometer function, press
the "LAP" push button (1) and the push
D
button .
The coolant temperature (6) and the digit-
al clock (7) appear on the right display
(multifunction).
c
When the engine is cold, the
COLD
writing " " is displayed.
use and maintenance RS 250 23