Using The System Setup Program And Uefi Boot Manager; Choosing The System Boot Mode - Dell POWEREDGE R515 Hardware User Manual

Using the System Setup Program
and UEFI Boot Manager
The System Setup program is the BIOS program that enables you to manage
your system hardware and specify BIOS-level options. From the System Setup
program, you can:
• Change the NVRAM settings after you add or remove hardware
• View the system hardware configuration
• Enable or disable integrated devices
• Set performance and power management thresholds
• Manage system security

Choosing the System Boot Mode

The System Setup program also enables you to specify the boot mode for
installing your operating system:
• BIOS boot mode (the default) is the standard BIOS-level boot interface.
• Unified Extensible Firmware Interface (UEFI) boot mode is an enhanced
64-bit boot interface based on Unified Extensible Firmware Interface
(UEFI) specifications that overlays the system BIOS. See "Entering the
UEFI Boot Manager" on page 70 for more information on this interface.
You select the boot mode in the Boot Mode field of the Boot Settings screen of
the System Setup program. After specifying the boot mode, proceed to install
your operating system from that mode. Thereafter, you must boot the system
to the same boot mode (BIOS or UEFI) to access the installed operating
system. Trying to boot the operating system from the other boot mode causes
the system to halt immediately at startup.
NOTE:
Operating systems must be UEFI-compatible (for example, Microsoft
Windows Server 2008 x64 version) to be installed from the UEFI boot mode. DOS and
32-bit operating systems do not support UEFI and can only be installed from the
BIOS boot mode.

Using the System Setup Program and UEFI Boot Manager

2
57